What To Do If There Is No Hot Water

What To Do If There Is No Hot Water

Blog Article

Get An Estimate

The author is making several good annotation about How to Troubleshoot and Repair an Electric Water Heater in general in this great article down the page.

Hot Water Heater Repair
Numerous modern-day homes utilize an electrical water heater for their furnace, as a result of its convenience as well as convenience of use. Nonetheless, just like any other electrical devices, troubles may occur with its use, all of a sudden. It can be really aggravating to get up to a cold shower instead of a hot one or having your bath with water that isn't hot sufficient and even as well warm. Whatever the instance might be, hot water heater troubles can be fairly nerve-racking. Fortunately, we've made a list of possible solutions to your water heater problems. There are a number of variables that might create many of these problems, it could be a problem with the power supply, the electrical heating element, or the thermostat. Before doing anything, ensure you shut off the primary power supply for security. Whatever the issue is, getting it taken care of ought to not present excessive of a problem if you comply with these actions:

Inspect Your Power Supply:

As standard as this might appear, it is extremely needed. Without appropriate power, your water heater will not function. So the first thing to do when your water instantly retires is to validate that it isn't a power issue. Inspect if the fuse is blown out or the circuit breaker stumbled. If the breaker is the problem, just turn it off and on once more. Replace any busted or damaged fuse. Check the home appliance with power after these changes to see if it's now functioning.

Examine the Heating Element in the Water Heater:

If it's not a power problem, after that attempt having a look at your heating element if it is still functioning. Check each of your heating elements to be sure the trouble isn't with any one of them. If any of them is defective, replace that component and afterwards inspect whether the hot water is back on.

Check Your Thermostat:

If your hot water heater still isn't functioning or the water coming out isn't hot sufficient, you might need to check the temperature level setups on your upper thermostat. Ensure the breaker is switched off before doing anything. Open up the access panel and also press the red switch for temperature reset over the thermostat. This must help warm the water. Turn the breaker back on as well as check if the trouble has been resolved.

Call A Specialist:

If after replacing all damaged parts and resetting your temperature, the water heater still isn't functioning, you might need to speak to a professional plumber for a professional point of view. The issue with your heater could be that the cold and hot taps have actually been changed or it might be undersized for the quantity of hot water required in your home. Whatever the instance may be, a specialist plumber would help address the problem.


Water heater issues are not always major. Many of them are because of small problems like a blown fuse or damaged heating element. Replacing the damaged parts must do the trick. Nevertheless, if you are still incapable to resolve the issue, give a call to your closest plumber ahead to get it fixed.

Common Reasons Why Your Hot Water Heater Isn’t Working

Water Gets Too Hot

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

Water Doesn’t Get Hot

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

Leaking Water Heater

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

Noisy Water Heater

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

Pilot Light Keeps Going Out

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

Water Smells Bad

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

Water Looks Brown Or Rusted

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.


Hot Water Heater Repair

We had been shown that write-up about How to Troubleshoot and Repair an Electric Water Heater through an associate on another domain. So long as you enjoyed reading our blog post kindly do not forget to pass it around. I appreciate reading our article about What Would Cause My Electric Water Heater to Stop Working?.

Visit Page

Report this page